[. . . ] " Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] Each time a track is displayed, you can hear the first several seconds of the track. When the last track on the third disc has finished playing, the unit will stop automatically. When there are more than 9 tracks on the video CD: Each press of the PRESET (NEXT ) button will display the next 9 tracks. You can look at the sections and select the scene you want to start watching from. This function is convenient when you want to start from the middle of an undivided track, for example, a movie. Whilst in the playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. You can play back from the desired scene by specifying the time and the track. The track being played back will be divided into 9 sections and playback will be paused. Each time a divided section is displayed, you can hear the first several seconds of the section. Use the direct search buttons on the remote control to specify the time. Press the direct search buttons on the remote control to select the scene you want to watch. Usually this unit detects the video CD and plays back pictures and sounds. In case this unit fails to judge it correctly, you can play back the video CD manually. Each time the OSD (OSD ON/OFF) button is pressed during playback or in the stop mode, the display will change as follows: This setting will be cancelled when you change the discs. Whilst in the "VCD ON" state, you cannot play back audio CDs. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. Be sure to place 8 cm (3") CD(s) in the middle of the disc positions. Total number of tracks on the CD whose number is flashing Total playing time of the CD whose number is flashing To select the CD you want to listen to first, press the DISC SKIP button. Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. When the last track on the third disc has finished playing, the CD player will stop automatically. When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. [. . . ] " When performing timer playback or recording using another unit connected to the VIDEO/AUX sockets, select "VIDEO/AUX" in step 2. At this time, only this unit will be turned on or enter the power stand-by mode automatically. It will enter the power stand-by mode when the end of the recording tape is reached in timer recording or 1 hour after the playback starts in timer playback. When using video equipment, connect the audio output to this unit and the video output to a television. [. . . ]